Have you ever wondered why finding a humidity solution is such a big deal when it comes to producing and storing wine and spirits in oak barrels? Well, the answer is that the relative humidity in the storage can greatly affect the wine and spirit aging process. If humidity levels are too low in the barrel storage, over time, more of the contents will evaporate through the barrel and the alcohol content will change. The final product may also have different flavors and characteristics.  

Uncontrolled humidity will affect the vapor pressure on oak barrels that are used for storage purposes for both wineries and fine liquor producers that age their product in oak barrels. Refrigerated wine and whiskey storages usually have evaporators inside the storage.  While these evaporators do a good job of stabilizing the temperature, they also remove moisture from the air. A properly sized humidity solution can offset the loss of moisture, protecting the valuable contents inside the barrel from evaporating. Humidification systems are one way that wineries and distilleries have been able to mitigate the costly process of topping their product off when aged in oak barrels. By stabilizing both the temperature and the relative humidity wineries and distilleries can protect the bottom line and ensure a better-quality product.

Adiabatic Humidity Solutions Available for Wineries and Distilleries 

There are a few different types of humidification systems that you can use in your winery. The most reliable and economical humidity solution type is a pressurized water nozzle humidifier. This system pressurizes water to 1000psi with a small electric motor and pump combination, then distributes a very fine water particle from a series of nozzles that is easily absorbed by the air. Another type of humidifier is compressed air humidifier. This type of system uses compressed air to create humidity. The major drawback operating a compressed air system is the noise level and the cost to run an air compressor. Compressed air systems are very loud and distracting. Also, compressing air is expensive and inefficient when compared to a pressurized water nozzle system. Pressurized water systems are less expensive to operate, much quieter and a better humidity solution for barrel storages and production environments. 

If you’re looking for ways to improve your wine-making process or storage facilities, adding a humidification system is a no-brainer. You want to produce the best wine and spirits possible, and that takes precision. With a humidity solution from MicroCool, you’ll get humidity levels that are perfect for your needs and your products. This is an investment that yields both immediate and long-term results and can create a superior product at every level in the process.

Don’t Hesitate When it Comes to Humidification for Wines and Spirits

Finding the right humidity solution is key when it comes to making and storing wine and spirits. The humidity level in the air affects how well the wine-making process goes.  Adding a humidification system can help improve quality issues tremendously. Not only will you have better-quality wine, but you’ll also protect your investment in equipment and storage facilities.

When it comes to humidity levels for wineries, there are a lot of factors to consider. The climate where the winery is located will have an impact on what the natural humidity level will be. The size of your winery or distillery will also have an impact. Importantly, the number of evaporators inside the storage will directly impact the relative humidity level.  If you wait until there’s a noticeable quality issue or excessive topping off barrels before you address your unstable humidity levels, it could be costly. Be proactive and get the best humidity solution for wineries and distilleries available anywhere on the market today from MicroCool.

We offer dependable and affordable humidity solutions that help ensure your valuable product will be protected.  If you’d like to learn more about our products, services, and solutions, feel free to contact us here to learn more. You can also call us via phone at 760-322-1111.