Environmental control presents tough challenges in any industrial workplace – and dust and odor are at the top of the list. Once again, MicroCool high-pressure fog systems are the answer, with the ideal solution for virtually any application.

MicroCool’s industrial odor control solutions conquer both dust and odor.

View MicroCool installation photos of dust and odor control solutions.

A Breath of Fresh Air

1 Remove dust from the air

Ultra-fine (10 microns or smaller) fog droplets attract and trap dust particles as they fall to the ground.

2 Eliminate odors

Odor neutralizing chemicals can be injected into the air, mixing with the droplets. Malodors are instantly eliminated with the fog.

3 Lower initial cost

Unlike ventilation systems, the MicroCool fog system requires no costly air compressors. And it’s significantly less costly to install than bag filter systems.

4 Lower operating cost

Built-in controls limit operation to only when required. A MicroCool system uses a fraction of the energy consumed by conventional systems.

5 Higher productivity

A healthier, safer, cooler, more comfortable workplace.

Getting dust and odor under control are a must, for worker safety and to meet regulatory requirements. Protect your employees and protect your business against costly environmental citations and fines with MicroCool’s industrial odor and dust control misting systems.

Industrial Dust Suppression – Designed for Your Site

Our design team will create a dust suppression solution tailored to your application, working closely with your building operators to fine-tune your system. Fog is carefully controlled, concentrated where it is needed most, without wetting the surrounding areas – avoiding unwanted dampness on work surfaces and floors.

By monitoring temperature and humidity levels, you can generate the optimum conditions to capture and contain fugitive dust throughout the building. Special options can include frost protection, auto purge, motion sensors and ambient temperature monitors.

MicroCool’s industrial dust suppression systems are most effective when wind or air speeds are below 200fpm, allowing fog droplets time to capture the dust. They are most effective in semi-enclosed areas. They are NOT effective in mining operations or material movement where winds and containment are an issue.

Odor Suppression Systems – Don’t Mask, Eliminate!

Odor control is often mandated by local authorities or residents, and accompanied by the potential for costly fines and penalties. Products that mask these odors are often inexpensive and ineffective, and simply add another odor to overpower the first one. Eliminating odors is the answer – and MicroCool is the solution.

Waste Water Treatment
Using municipal water alone is often sufficient to eliminate many malodorous situations. However, when water alone is not enough, a mixture of odor-neutralizing product and water can be used. The mixture is then instantly atomized into billions of micron-sized droplets. The water quickly evaporates, leaving the odor-neutralizing product to entrap and biodegrade the malodors.

Cannabis Grow Facilities
MicroCool’s high pressure fog systems are uniquely suited to provide many benefits for cannabis growers. In addition to providing safe, eco-friendly odor elimination, fog provides the perfect combination of humidity and cooling that optimizes plant growth.

As always, with MicroCool you’re in control. Sensors enable you to control when the odor suppression system is activated based on time, air temperature, and wind direction and speed. MicroCool can recommend manufacturers whose products are distributed via a high-pressure mist system. Read more on using high-pressure fog to eliminate cannabis odors.

Environmental Applications

Dust Control

  • Transfer stations
  • Entry doorways and tipping points
  • Waste disposal stations
  • Sewage treatment plants
  • Rendering plants and animal operations
  • Woodworking and manufacturing facilities

TECH TALK: “Point Source Emission”

Dust Control Misting Systems

MicroCool dust suppression systems are designed to concentrate on the origin point of the dust, capturing it as it escapes rather than when it has become airborne. The system is particularly effective on PM10 and smaller particles, which form an ionic bond with the fog droplets. The resultant heavier-density droplet falls to the ground for collection and disposal. Larger droplets tend to simply “push” the dust away.

Odor Control

  • Transfer stations
  • Lift wells
  • Trash stations
  • Extractor fans
  • Rendering plants
  • Waste water treatment
  • Bio filtration
  • Cannabis grow facilities
  • Organic recycling facility

TECH TALK: “Creating an “Odor Barrier”

Industrial Cooling Fog Systems

MicroCool nozzle lines form a ring around the culprit pond, reservoir or odor outlet. Strings of nozzles are placed at a distance of around 48″/1.25mm to create a barrier through which the malodor must pass.

Commercial & Industrial Dust Control Misting Systems

MicroCool is a leader in innovative solutions for odor and dust control in industrial facilities around the world. Our high-pressure fog systems work by spraying micro-droplets of water (10 microns or smaller) into the air, trapping any dust particles floating in the atmosphere.  

We supply highly effective precision fog systems for ultra-fine misting that can effectively reduce the toughest odors and other unwanted small particles like dirt, dust, soil, sand, and gravel. These systems can be installed in a variety of outdoor and indoor spaces such as waste water or sewage treatment plants, waste disposal stations, construction sites, recycling centers, woodworking facilities, and more.

MicroCool’s Dust Control Fogging Systems

Fogging or misting systems for controlling dust are a critical part of many industrial operations. After all, it’s vital to protect your workers, your equipment, and the local environment from these potentially harmful particulates. Too much dust in the surrounding air currents can cause or aggravate several health issues, including asthma and lung disease.

At MicroCool, we offer high-pressure fogging systems that can prevent particles of dust and other contaminants from spreading around or settling on a hard surface. The tiny water droplets are sprayed into the air by a MicroCool dust control system to capture these particles before they travel, thereby improving the quality and freshness of the indoor air.

This helps create a cleaner, healthier environment for your employees and neighbors. We understand that your goal is to be a legally compliant and considerate organization, so our customized industrial dust control systems are all designed to comply with regulations.

MicroCool’s Odor Suppression Systems  

Industrial odors are not only distracting, but they can also wreak havoc on your workers’ health and overall morale. By investing in MicroCool’s advanced fogging system for odor control, you gain fresh-smelling air. Taking this measure also shows your employees that you care about their well-being, which can ultimately translate into higher productivity and a more profitable bottom line.

Your relationship with your local community will be in a much better place as well thanks to our odor suppression systems. Remember, when industrial facilities carelessly discharge unpleasant odors and fumes into the environment, they are highly likely to receive complaints, which often result in hefty fines or worse.

You can improve your reputation among your employees and the community at large by keeping the pesky odors under control with our misting systems. If regular water is not enough to get rid of most unpleasant smells, you can mix it with an odor-neutralizing agent before running it through nozzles on the exterior of your building.

Looking to Upgrade Your Odor and Dust Control Measures? Contact Us to Learn More 

MicroCool misting systems are designed to capture and neutralize tiny dust emissions resulting from grain and lumber processing, cutting/grinding/sanding tasks, construction jobs, mining operations, waste transfer stations and water treatment facilities.

Airborne particulates have been shown to damage workplace health conditions and the efficiency of expensive equipment. Our team custom designs advanced dust control misting systems that produce small water droplets to catch and remove unwanted particles via the process of agglomeration. This simply means that the harmful particles will drop from the air without wetting the surface to ensure long lasting protection of your industrial equipment and facility.

If you’re looking for an affordable and energy-efficient way to prevent and control dust and odor, contact our team today. Give us a call at 1-800-322-4364 or send us a message online